Jump to content
  • 1. PCB layout design

    I design the PCB layout project in one layer, two layers or four layers. PCB projects can be used to manufacture PCB prototypes or large amounts of PCB's.

    PCB layout projects can be presented in the following form: PDF files + Gerber 274X files, if you want to build PCB's in multiple copies to a specialized company + your prototype. Gerber format is 274X and is a format supported by many PCB manufacturers.

    PCB projects are made keeping in mind the standard IPC2221 and another standard's.

    To find out the cost of PCB layout design, please register on the website (the activation of the current account is manually done by me, with some delay, excuses) and then please buy a consulting product in the field (see link below after you have logged in to the site - only 3 Euro is Quotation PCB Layout Design - pay with paypal ) after which I I will generate a price offer based on the information provided by you.

    In the first phase of the project, after you send me the final version, I communicate your project cost and period of the design (or timing of development of the design). If you agree, then move on to second part below.

    In the second part of the project, as things evolve right (example: we agreed on the price of the project), after you send me the final version of the schematic, I'll reproduce that schematic. To do this, you must pay in advance 10…50% of the project cost. So, you have to make payment through Pay-Pal, 10…50% of the project cost to redesign schematic (paypal fees are paid by the customer) and start PCB layout design. After I reproducing circuit diagram, I'll send you the PDF version of it to analyze (with 3D PCB Preview). Then you can do some corrections or additions (improvements) before moving effective to PCB layout routing.

    In the third part of the project will begin the actual design of the PCB. The remaining project cost can be paid within 1, 2 or 3 installments (or rates). Pay an installment involves continuous design. In the third stage does not allow schematic changes - is permitted only small changes in PCB fotoprint of active electronic components (like transistors or integrated circuits, but not resistors or capacitors).

    Payment will be made in advance through pay-pal after a preliminary discussion in which we establish conditions for project delivery and project execution time.

    I assure the confidentiality of schematic submitted and that: I don't allow you to specify the values of passive components (like resistors and capacitors), plus it guarantees, that the confidentiality of the project.

    I will give all my experience practice for PCB layout project results to be very useful and will bring money to you.

    I posted below some of the projects I worked on (My portofolio) and from which I obtained permission from clients, to post them in this section:

    Portofolio PCB Layout design.png

    PCB project A.jpg

    EBGA64 to DIP48 adapter & EBGA64 breakout board_foto 1.jpg

    Opus 5 - 3D TOP VIEW.png

     

    PCB PSU & Output Audio Section A & B.jpg

    SMPS700_PCB Layout Design.jpg

     

    stereo mastering compressor.jpg

  • Member Statistics

    1
    Total Members
    4
    Most Online
    DonPetru
    Newest Member
    DonPetru
    Joined
  • Recently Browsing   0 members

    No registered users viewing this page.

  • 2. Technical consultancy:

    a) for the development of audio products (audio amplifiers, audio tone correctors, preamplifiers ...)

    b) for the development of power supplies (common and switching)

    c) for the development of applications with Atmel AVR microcontrollers;

    d) for the development of schemes of electrical installations related to civil and industrial buildings (I am an electrician with ANRE degree IV authorization - any level of electrical voltage);

    e) for the development of projects of fixed electric traction installations in the railway field (electrification projects, OHL and electrical equipment...)

    To find out the cost of the technical consultancy, please register on the site (the activation of the momentary account is done manually by me, with some delay, excuses) and afterwards please buy a consultancy product in the field which I will follow. generate a price offer, based on the information provided by you.

     

    !!! To purchase a standard technical support package in order to determine the other details regarding your requirement,  please register on my website. 

    Note that within the technical support ticket we can only discuss the problem in general and we can negotiate the contract and the number of hours required to complete your requirement. A technical support package can contain no more than three questions regarding the requirement. Only if after the discussion you agree with the conditions, we will be able to go further.

    [Info] About ANRE:

    https://www.anre.ro/en

     

     

×
×
  • Create New...